|
Version 9.2.5
|
Improved handling of external sensors (humidity, pressure)
Improved handling of temperature
Removed pressure info if sensor disappears
More retires on the sensors
Some cosmetic fixes
Partial support for the future TSL237 sensor
|
|
Version 9.2.0
|
Rain is unknown if > 8000.
Fiixed the K-factors setting graph.
Pocket PC working fine again.
In remote mode amb temp origin is chosen by master (cannot be edited by remote).
|
|
Version 9.1.6
|
Fixed missing music icons.
Corrected problems with some german computers.
|
|
Version 9.1.5
|
Wind gust.
JSON data file.
Bug fixes regarding decimal point and internationalisation.
|
|
Version 9.0.0
|
New interface.
Pressure and full RH support.
Current rain sensor model limits as defaults.
|
|
Version 8.3.1
|
Fixed a problem with the "black" anemometer.
Humidity and dew point in user data file.
|
|
Version 8.2.0
|
Serial port retrying to recover from USB/Serial adapter problems.
Cosmetic fixes.
|
|
Version 8.0.0
|
Removed AAG News (was causing an ugly window to appear over the program).
Support for pocketCW - PC version.
Support for increased resolution ambient temperature and relative humidity.
Simplified the version numbering.
|
|
Version 7.80.001
|
Allowed the lower limit of the rain sensor valid value to be 0.
Removed the (non working) software update option.
Fixed the About dialog.
|
|
Version 7.80.000
|
Improved the unknown detection and indication.
|
|
Version 7.60.000
|
Added another CCDAP4 file with "," as decimal separator, for users with non-localized client software.
Supported the Cloud Alarm Delay also in normal operation (previously only useful for external COM access).
RH sensor ambient temperature also offset corrected.
Support for the new, black, anemometer from IED.
Changed the default names for CCAP4 files to "aag_sld.dat" (single line data) and "aag_sldc.dat" (same, decimal comma separated).
|
|
Version 7.50.100
|
Fixed some problems with time syncromization between master & remote mode.
|
|
Version 7.30.100
|
Ambient and IR temperature offsets added to the Master mode.
|
|
Version 7.20.000
|
Added 2 extra fields to the CCDAP4 files.
|
|
Version 7.10.000
|
CCDAP4 files always generated in the new, extended format.
|
|
Version 7.00.200
|
Minor adjustment to cloud graph temperature upper limit. This limit was not correctly converted when changing temperature units from Celsius to Fahrenheit.
|
|
Version 7.00.100
|
First release.
This version is designed to run with the new device model which supports an anemometer (optional).
The new device (firmware version 5.xx) has a built-in shutdown routine which sets the rain sensor heater power as well as the switch state when the device does not receive any requests for awhile (see Device Internal Parameters).
|
